Automatic workout detection
Your band can identify your workout status on its own. This feature is disabled by default. To use
it, you need to enable it manually.
After you have enabled
Auto-detect workouts
under
Settings > Workout settings
, the
wearable will remind you to start the workout if it detects that there is a change in your activity
intensity and suggests a workout mode for you. You can select to ignore or start recording the
workout session. Currently, this feature can detect walking, running, elliptical, and rowing
workouts.
•
Different products support different types of exercises, please check the device interface
prompts.
•
This feature requires trigger posture and intensity requirements of the exercise type, and stay
in this exercise state for a period of time (walking exercise is about 10 minutes, other exercises
are about 3 minutes), then the device automatically judges the exercise type and reminds the
user to start a single exercise.
•
After the reminder is triggered, the vibrating reminder interface lasts for 30 seconds. If the user
does not handle it, the reminder disappears. If the user continues to exercise, it will vibrate
again after 3 minutes. If the user does not operate after three reminders, the exercise self-
recognition will end.
•
If the actual exercise intensity is less than the exercise type intensity requirement for a period
of time (more than three minutes), the device will pop up a reminder of the end of exercise,
and you can ignore or end the exercise.
Workout modes
10
