background image

 

 

 

 

LIMITED WARRANTY 

Honeywell International Inc., acting through its Security & Custom Electronics business ("Seller") 165 Eileen Way, Syosset, New 
York 11791, warrants its product(s) to be in conformance with its own plans and specifications and to be free from defects in 
materials and workmanship under normal use and service for 24 months from the date stamp control on the product(s) or, for 
product(s) not having a manufacturer’s date stamp, for 12 months from date of original purchase unless the installation 
instructions or catalog sets forth a shorter period, in which case the shorter period shall apply. Seller's obligation shall be limited 
to repairing or replacing, at its option, free of charge for materials or labor, any product(s) which is proved not in compliance with 
Seller's specifications or proves defective in materials or workmanship under normal use and service. Seller shall have no 
obligation under this Limited Warranty or otherwise if the product(s) is altered or improperly repaired or serviced by anyone 
other than Honeywell factory service. Connection of any device(s) to a communicating bus of a Honeywell security system (e.g., 
keypad bus, polling loop) other than those manufactured or approved by Honeywell shall void this warranty.  For warranty 
service, return product(s) transportation prepaid, to Honeywell Factory Service, 165 Eileen Way, Syosset, New York 11791. 

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR 
PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO CASE 
SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF 
THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, 
EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT. 

Seller does not represent that the product(s) it sells may not be compromised or circumvented; that the product(s) will prevent 
any personal injury or property loss by burglary, robbery, fire or otherwise; or that the product(s) will in all cases provide 
adequate warning or protection. Customer understands that a properly installed and maintained alarm system may only reduce 
the risk of a burglary, robbery, fire

,

 or other events occurring without providing an alarm, but it is not insurance or a guarantee 

that such will not occur or that there will be no personal injury or property loss as a result. CONSEQUENTLY, SELLER SHALL 
HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THAT 
THE PRODUCT(S) FAILED TO GIVE WARNING. HOWEVER,

 

IF

 

SELLER

 

IS

 

HELD

 

LIABLE,

 

WHETHER

 

DIRECTLY

 

OR

 

INDIRECTLY,

 

FOR

 

ANY

 

LOSS

 

OR

 

DAMAGE

 

ARISING

 

UNDER

 

THIS

 

LIMITED

 

WARRANTY

 

OR

 

OTHERWISE,

 

REGARDLESS

 

OF

 

CAUSE

 

OR

 

ORIGIN,

 

SELLER'S

 

MAXIMUM

 

LIABILITY

 

SHALL

 

NOT

 

IN

 

ANY

 

CASE

 

EXCEED

 

THE

 

PURCHASE

 

PRICE

 

OF

 

THE

 

PRODUCT(S),

 

WHICH

 

SHALL

 

BE

 

THE

 

COMPLETE

 

AND

 

EXCLUSIVE

 

REMEDY

 

AGAINST

 

SELLER. 

This warranty replaces any previous warranties and is the only warranty made by Seller on this product(s). No increase or 
alteration, written or verbal, of the obligations of this Limited Warranty is authorized. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

165 Eileen Way, Syosset, New York 11791

Copyright © 2006 Honeywell International Inc.

www.honeywell.com/security

 

 

‡K3138V1RŠ 

K3138V1  5/06  Rev. A

 

Summary of Contents for ZR530

Page 1: ...e 0 15 1 5m sec Mtg Height 2 1m but may be mounted at other nominal heights see Table 1 Walk Test Indicator Red LED with Test Normal disable link Batteries Two 3 volt lithium batteries Use only Duracell DL123A Panasonic CR123A or Sanyo CR123A 0perating Temperature 0 C 50 C Operating Humidity Up to 95 RH max non condensing Dimensions 68mm x 127mm x 48mm Figure 1 Standard Wide Angle Protection Patte...

Page 2: ...is designed to provide stability in adverse environments to minimize false alarms Pulse count is selected by positioning a jumper across the ON pulse count terminals shown in Figure 4 When set for pulse count the detector will signal an alarm within 2 or 3 steps since the processing logic requires more complex motion than just a momentary event When the detector verifies an intrusion the built in ...

Page 3: ... of protection and intrusion can only be detected in unobstructed areas covered by those beams Passive Infrared Detectors cannot detect motion or intrusion that takes place behind walls ceilings floors closed doors glass partitions glass doors or windows Mechanical tampering masking painting or spraying of any material on the lenses windows or any part of the optical system can reduce the detectio...

Page 4: ...ON ON THE FACE HEREOF IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR IMPLIED OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER S OWN NEGLIGENCE OR FAULT Seller does not represent that the product s it sells may not be compromised or circumvented that the pro...

Reviews: