background image

Binding your thermostat to a 

RFG100 Internet Gateway

If you want to operate your Thermostat remotely or add 

scheduling then you will need to use the Honeywell RFG100 

Internet Gateway and bind the thermostat to it.
To do this, please follow the full installation instructions 

in the RFG100 box, and at the relevant binding stage 

follow these steps to connect your thermostat:

2.  Briefly touch the right-hand touch 

zone once again to send the binding 

signal. The   and   symbols will 

flash until binding is successful. 

3.  With good reception, the 

green   LED on the Gateway 

will then light up to confirm 

successful binding. 

1.  Touch and hold the right-hand 

touch zone for about 10 seconds 

to activate the binding screen.

10s

4.  After binding, the strength of the 

signal between the devices will 

appear on the thermostat for a 

few seconds. 1 equals the lowest 

strength and 5 the highest. 

 

Then the normal screen will be 

shown, including a   symbol 

to confirm the Gateway and the 

thermostat are now connected.

5.  Please refer to your Gateway 

instructions to learn how to 

create your online account and 

download our smartphone app.

Remote Operation

The thermostat can be controlled remotely if it is bound 

to a Wireless Internet Gateway, type RFG100.

2.  When the set temperature is 

changed remotely a square 

border will appear around 

the Connected symbol.

Clock

 

A remote time schedule 

is operating, or  a timed 

override has been set

Lock

 

The temperature setting has 

been fixed for an indefinite time

OFF

 

The thermostat has been 

switched off remotely (control is 

at the off temperature setting)

3.  Other possible display symbols and their meaning:

1.  The Connected symbol is 

displayed if the thermostat 

is bound to the Gateway.

4.  You can always check the temperature setting by turning 

the dial one click. Continue to rotate the dial to change 

the set temperature. This will cancel any setting made via 

the app, except when the lock symbol is displayed.

This is only required if the gateway is purchased 
separately. If the gateway is supplied with the 
thermostat it will already be bound to it.

For support:

Resideo

200 Berkshire Place
Winnersh Triangle, Berkshire
RG41 5R
Phone: 0300 130 1299

Printed in EU.

© 2020 Resideo Technologies, Inc. All rights reserved.

The Honeywell Home trademark is used under license from Honeywell International Inc.

This product is manufactured by Resideo Technologies, Inc. and its affiliates.

Pittway Sarl, Z.A. La Pièce 4, 

1180 Rolle, Switzerland

Country of origin : UK

Reviews: