GB
While the device is activated, open the front cover and press the “BT3” button located in the left part,
inside of the device, for 3 seconds. Avoid touching other areas of the device electronics. The “LD7” green
LED will start blinking 2 times per second, indicating the Wi-Fi Access Point ready.
To proceed with configurations, a device with Wi-Fi connectivity and DHCP (i.e. a laptop PC, a smartphone
or tablet) is required.
STEP 1 – Enable Gateway invitation via TELA2 software.
Use one of the available connection methods in order to establish communication between the 138091
and the TELA2 software, depending to your application.
Commissioning:
First, via the TELA2 software user interface, go to “Installation > Add Gateway” and click “Start”. The
software will enter a mode to accept new Gateway devices (138091).
STEP 2 – Configure the Gateway to connect to local network and TELA2.
Use your Wi-Fi device (laptop, smartphone) in order to connect to the Wi-Fi Access Point with the SSID
(name):
“WIRELESS_LIGHTING_GATEWAY”
Use the following password when asked:
“WIRELESSGW”
LD7
BT3
“BT3” button and “LD7” LED position
Honeywell Life Safety AS, Postboks 263, 1372 Asker
http://www.hls-nordic.com
