Voyager 1470/1472 User Guide
87
Deactivation Character
This sets the character used to terminate scanning when using Character Deacti-
vation Mode. On the
ASCII Conversion Chart (Code Page 1252)
that represents the character you want to use to terminate scanning. Scan the fol-
lowing bar code, then use the
to read the alphanumeric com-
bination that represents that ASCII character. Scan
Save
to finish.
Illumination Lights
If you want the illumination lights on while reading a bar code, scan the
Lights On
bar code, below. However, if you want to turn just the lights off, scan the
Lights Off
bar code.
Default = Lights On.
Note:
This setting does not affect the aimer light. The aiming light can be set using
.
Aimer Delay
The aimer delay allows a delay time for the operator to aim the scanner before the
picture is taken. Use these codes to set the time between when the trigger is pulled
and when the picture is taken. During the delay time, the aiming light will appear,
but the LEDs won’t turn on until the delay time is over.
Default = Off.
Deactivation Character
* Lights On
Lights Off
200 milliseconds
400 milliseconds
Summary of Contents for Voyager XP 1470
