28
i. Trigger recording: Place a check mark
'√ ' for the channel you need to trigger, when
there is alarm on the setting channel, will trigger to other channels.
ii.
Snapshot: Place a check mark '√ ' in front the channel, when the setting channel has
alarm, will snap a picture.
iii. Send E-mail: Place a chec
k mark '√ ', when there is alarm, will send the snapped
picture to the mailbox you set.
iv.
Alarm output: Place a check mark '√ ', will trigger the external alarm.
v. Alarm output duration: Click the inverted triangle, options: 10s/ 30s/ 1min/ 3 min/ 5min/
10min/ 15min/ 30min.
vi. Buzzer: Click the inverted triangle, options: None/10s/ 30s/ 1min/ 3 min/ 5min/ 10min/
15min/ 30min.
vii. Pop-
out image: Click the inverted triangle, options: None/ CH1/ CH2…
viii. Post-record: Click the inverted triangle, options: 10s/ 30s/ 1min/ 3 min/ 5min/ 10min/
15min/ 30min.
ix. Pre-record: Click the inverted triangle, options: None/ 5s/ 10s
x. Trigger PTZ: None/ Cruise line/ Preset point
xi.
Attention: Click “Apply” after setup.
Video Loss:
Alarm when there is video loss.
Summary of Contents for VISTA CADVR-1004C
Page 2: ...2 ...
Page 41: ...41 3 5 2 NETWORK User can check all of information of LAN PPPoE 3G after connected DVR ...
Page 71: ...71 6 2 9 EXIT ...
Page 80: ...80 MEMO ...
