background image

 15

Equipment Maintenance Facility 

If trouble is experienced with this equipment, for repair or warranty information, please 
contact the facility indicated below. If the equipment is causing harm to the telephone 
network, the Telephone 
Company may request that you disconnect the equipment until the problem is solved. This 
equipment is of a type that is not intended to be repaired by the end user. 
Multi-Tech Systems Inc. Moundsview, MN, USA, Tel 1-800-328-9717. 

Additional Information 

Connection to party line service is subject to state tariffs. Contact the state public utility 
commission, public service commission or corporation commission for information. 
If your home has specially wired alarm equipment connected to the telephone line, ensure 
the installation of this equipment does not disable your alarm equipment. If you have 
questions 
about what will disable alarm equipment, consult your telephone company or a qualified 
installer. 

Industry Canada Compliance Statement 

This Class B digital apparatus meets all requirements of the Canadian interference-causing 
equipment regulations. 
Cet appareil numérique de la Classe A respecte toutes les exigences de règlement sur le 
matériel brouilleur du Canada. 
 

Summary of Contents for V4000

















Reviews: