background image

UC100 ULTRAVIOLET SYSTEM REPLACEMENT BULB/HANDLE ASSEMBLY

Automation and Control Solutions

Honeywell International Inc.

Honeywell Limited-Honeywell Limitée

1985 Douglas Drive North

35 Dynamic Drive

Golden Valley, MN  55422

Toronto, Ontario  M1V 4Z9

customer.honeywell.com

® U.S. Registered Trademark
© 2006 Honeywell International Inc.
69-1444—5    M.S.  Rev. 10-06 

Summary of Contents for UV100E1043

Page 1: ...te check out product operation as provided in these instructions CAUTION Personal Injury Hazard Power supply can cause electrical shock Disconnect power supply before replacing ultraviolet bulb s Do not open base unit or lamp handle there are no user serviceable components inside WARNING UV Light Hazard Harmful to bare skin and eyes Can cause temporary or permanent loss of vision Never look at bul...

Page 2: ...s Annual replacement of your bulbs is required To replace your bulbs 1 Select and obtain the correct replacement bulb for your unit See Table 1 2 Disconnect the power to your heating and cooling system 3 Unplug or turn off power to your UV System and allow the bulbs to cool for at least 15 minutes 4 Rotate the lamp handle counterclockwise and gently pull the lamp handle to remove the bulb See Fig ...

Page 3: ... exposure to ultraviolet light disconnect power to Ultraviolet System before servicing any part of heating and air conditioning system 11 Verify that your ultraviolet bulbs are operating by viewing only through the lamp light indicator on the lamp handle Never look directly at your lamp while it is illuminated 12 Reconnect the power to your heating and cooling system 13 For SmartLamp models press ...

Page 4: ...Control Solutions Honeywell International Inc Honeywell Limited Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley MN 55422 Toronto Ontario M1V 4Z9 customer honeywell com U S Registered Trademark 2006 Honeywell International Inc 69 1444 5 M S Rev 10 06 ...

Reviews: