5
D
. Funnel-shaped top with battery compartment
Contains battery compartment and rainfall counting electronics
E.
Battery compartment
Holds two AA-size batteries
F
. Screws
Secure battery compartment cover
G
. Built-in leveler
Allows leveling rain gauge on the surface
H
. Bucket see-saw mechanism
Collects the rainfall in one of its containers and self-empties once full
I.
Protective screen
Protects the rain gauge funnel from debris
Battery installation
•
Unlock the funnel-shaped top on the rain gauge by turning both knobs on the
sides in an anti-clockwise direction.
•
Remove the funnel-shaped top lifting it off the rain gauge bucket.
•
Remove 7 small screws from the battery compartment cover using a small
Phillips screwdriver
•
Insert 2 “AA” size alkaline batteries (not included), matching the polarities as
shown in the battery compartment.
•
Replace the battery compartment door and secure the screws.
•
Insert the funnel-shaped top into the rain gauge bucket and secure it into place
by turning the knobs clockwise.
•
Press
DOWN
button either on the main unit control panel or handheld remote
control. The rain reading (usually 0.00) will appear in the rain window of
TE923W main unit display, instead of “ - - -“. Make sure you are aware that the
rain gauge transmission interval is 183 seconds, so the reading will not appear
D
E
F
G
I
H
H
