11
11
The remote temperature and humidity for channel one, two and three
can be recalled by pressing
CHANNEL
button.
The wave icon is located above the remote channel number and
indicates the reception status from the remote sensor.
The following three types of reception status may be displayed:
The unit is in searching mode.
Temperature and humidity readings are securely
registered.
No signals detected.
- - -
NOTE
: If the indoor or remote temperature and/or humidity goes above
or below operating range stated in specifications, the main unit’s
display will show dashes “- - -”
COMFORT LEVEL INDICATORS
The Wireless Thermo-Hygrometer is capable of detecting and
displaying the present comfort levels for the surrounding environment.
The environmental comfort level is detected, interpreted and displayed
on the main unit’s display based on the combination of the current
indoor and remote temperature and humidity readings. The four
following comfort levels may be shown:
☺
(
comfort),
(
wet),
(
dry
)
and No Indicator.
12
Indicator
displayed
Temperature
Range
Humidity
Range
Shows current
condition
☺
20°C to 25°C
(68°F to 77°F)
40%RH-
70%RH
Ideal for both
relative humidity
and temperature
-5°C to 50°C
(23°F to122°F)
OVER
70%RH
Contains excess
moisture
5°C to 50°C
(23°F to122°F)
BELOW
40%RH
Contains
inadequate
moisture
MAXIMUM AND MINIMUM MEMORY
The maximum and minimum record of the indoor and remote
temperature and humidity will be automatically stored in the memory of
the main unit (receiver).
To display the minimum, maximum or the current reading press the
MEMORY
button after desired mode (indoor or remote) is selected.
If no button is pressed for the next 15 seconds, the unit will return to the
current temperature and humidity display for applicable mode.
To clear the memory, press and hold the
MEMORY
button for two
seconds and all previously stored readings will be erased.
AUTO-SCANNING
Press and hold the
CHANNEL
button for 2 seconds – the icon “
3
”
will appear on the main unit display above the
COMFORT LEVEL
indicator. The indoor temperature and all 3 remote temperatures will be
