11
11
I
. Protective screen
Protects the rain gauge funnel from debris
REMOTE SENSOR
FEATURES
•
Remote temperature transmission to the main unit via 433 MHz
signal
•
100 feet (30 meters) transmission range without interference
•
LCD display of measured temperature
•
Three transmission (3) channels selection
•
Selection of the temperature display in Celsius or Fahrenheit
•
Case can be wall mounted using built-in hanger
A. LED INDICATOR
•
Flashes once when the remote temperature sensor transmits a
reading to the main unit.
•
Flashes twice when battery power is low.
B. BATTERY COMPARTMENT
12
Holds two AA-size batteries
C. RESET
Resets all readings
D. CHANNEL SWITCH
Selects the desired channel
E. WALL-MOUNT RECESSED OPENING
Keeps the remote temperature sensor on the wall
F. °C/ °F SELECTOR
Selects the temperature display in Celsius or Fahrenheit
BEFORE YOU BEGIN
•
We recommend using alkaline batteries for the remote rain gauge,
temperature sensor and main unit when temperatures are above
32°F (0°C). We recommend using lithium batteries for the
temperature sensor when temperatures are below 32°F (0°C).
•
Avoid using rechargeable batteries. (Rechargeable batteries
cannot maintain correct power requirements).
•
ALWAYS
install batteries in the
remote rain gauge and the
remote temperature sensor
before
the main unit.
•
Insert batteries before first use, matching the polarity in the
battery compartment
•
Press
RESET
in the remote temperature sensor after each
battery change with a paper clip or similar tool.
•
Remove protective plastic screen from LCD display (If any)
•
During an initial setup, place the main unit close to the remote
rain gauge and remote temperature sensor
•
Important
: Only after reception is established (the remote rainfall
data and temperature will appear on the main unit’s display), you
may position and mount the remote sensors (the rain gauge and
