19
19
MAXIMUM AND MINIMUM TEMPERATURE
The maximum and minimum record of the indoor and remote
temperatures will be automatically stored in the memory of the main unit.
To display the minimum, maximum or the current reading press
MEMORY
button on the back panel.
To clear the memory, press and hold
MEMORY
button on the back for
two seconds and all previously stored readings will be erased.
LOST COMMUNICATION
If the main unit display line for the remote temperature sensor reading
goes blank, press and hold
the back DOWN (
▼
)
button
for 2 seconds to
begin a new signal search. If the signal still isn’t received, please make
sure that:
•
The remote temperature sensor is in its proper location.
•
The distance between main unit and remote temperature sensor
is not over 100 feet (30meters).
•
The path between units is clear of obstacles. Shorten the
distance if necessary.
•
Fresh batteries are installed correctly in both remote temperature
sensor and main unit.
If there is no reception, please perform the following steps:
•
Bring the main unit and remote temperature sensor close
together.
•
Remove four (4) small screws from the back of the remote
temperature sensor with small Phillips screwdriver, and open the
battery compartment.
•
Remove the batteries from the battery compartment and reinstall
them in the same manner. Remote sensor LED indicator will flash
showing transmission of the signal.
20
•
Remove the batteries from the main unit and reinstall them in the
same manner.
•
The remote temperature appeared on the main unit’s display will
show that transmission is being received successfully.
If the main unit display line for the remote rain gauge reading goes blank,
press and hold
the front
DOWN (
▼
)
button
for 2 seconds to begin a new
signal search.
If the signal still isn’t received, please make sure that:
•
The remote rain gauge is in its proper location.
•
The distance between main unit and remote rain gauge is not
over 100 feet (30meters).
•
The path between units is clear of obstacles. Shorten the
distance if necessary.
•
Fresh batteries are installed correctly in both remote rain gauge
and main unit.
TRANSMISSION COLLISION
Signals from the other household devices such as wireless doorbells,
home security systems, and entry control, may interfere with this product
or cause temporary reception interruption. This is normal and will not
affect the general performance of the product. The transmission and
reception of the remote readings will resume once the interference
subsides.
CALENDAR AND CLOCK DISPLAY MODES
Date is displayed in month-date or date-month format. Each press of the
MODE
button on the back panel will toggle the clock modes between the
time with seconds, time with the day, time zone and a calendar.
