manualshive.com logo in svg

Honeywell TB8220U1003 - Touchscreen Thermostat, 2h, Owner'S Manual, Page: 30 / 32

Share
Download
Honeywell TB8220U1003 - Touchscreen Thermostat, 2h Owner'S Manual Download Page 30

30

62-3071—2

Frequently Asked Questions and Answers

Q:

Some or all keys on the display do not work; why not?

A:

Thermostat screen is locked.

Q:

Backlighting seems dim; is it designed to be dim?

A:

When using batteries for power, install fresh AAA alkaline batteries.

Q:

Thermostat is asking for heating or cooling to come on (screen shows “Heat On” or 

“Cool On” in display) but there is no heating or cooling running.

A:

Call your local heating and/or cooling contractor to check your heating and/or cooling 

system.

Q:

Why doesn’t the thermostat respond when I touch the screen?

A:

Check to determine if the screen is in the Locked or Clean mode. See Screen Locked 

and Cleaning Thermostat Screen sections.

Q:

The thermostat only allows selection of one day to program. Why is this?

A:

Check the screen to ensure it shows OK TO PICK MULTIPLE DAYS. 

You may need to simply press EDIT.

Summary of Contents for TB8220U1003 - Touchscreen Thermostat, 2h

































Reviews:

No comments