manualshive.com logo in svg

Honeywell TB8220U1003 - Touchscreen Thermostat, 2h, Owner'S Manual, Page: 29 / 32

Share
Download
Honeywell TB8220U1003 - Touchscreen Thermostat, 2h Owner'S Manual Download Page 29

29

62-3071—2

Step 7. User Setup Number 0330: Daylight Saving Time On or Off.

To change Options, press the Up or Down arrow to the right of the number in the lower right 

corner of the screen. Options:

0 — Off. Thermostat time does not adjust automatically for Daylight Saving Time.

1 — On. Thermostat time adjusts automatically for Daylight Saving Time in Fall and Spring.

Step 8. User Setup Number 0540: Programmable Periods per Day.

To change Options, press the Up or Down arrow to the right of the number in the lower right 

corner of the screen. Options:

2 — 2 periods per day.

4 — 4 periods per day.

Step 9. User Setup Number 0640: Time Format.

To change Options, press the Up or Down arrow to the right of the number in the lower right 

corner of the screen. Options:

12 — 12 hour clock.

24 — 24 hour clock.

Step 10. Exit User Setup

Press DONE to exit Advanced Settings and return to the main screen.

Summary of Contents for TB8220U1003 - Touchscreen Thermostat, 2h

































Reviews:

No comments