manualshive.com logo in svg

Honeywell T8524, Product Data, Page: 8 / 16

Share
Download
Honeywell T8524 Product Data Download Page 8

T8524 DELUXE ELECTRONIC THERMOSTAT

68-0202

8

Table 4. Thermostat Installer Setup Options (continued).

IMPORTANT

Review the settings to confirm that they match the
system.

INSTALLER SYSTEM TEST

Use the Installer System Test to check the thermostat
configurations and operation. Refer to Table 5 for a list of the
available system tests.

To start the system test:

NOTE:

The minimum off time for compressors is bypassed
during the Installer System Test.

Fig. 10. All the segments of the LCD displayed.

Em HeatOffCool Auto Only

Heat Cool

OnAuto

System

Fan

Room

Outdoor

Em Ht Temporary Setting

Wait

%Humid

Aux Ht

Remote

Repl

Batt

M4844

Fig. 11. Test number displayed.

Refer to Table 6 for the directions and results of the specific
tests.

NOTE:

Press and hold the increase 

▲

 and decrease 

▼

 keys

together for three seconds to exit the system test.
The system test will time out after five minutes
without any key presses.

Press and hold the increase 

▲

 and decrease 

▼ 

keys at the

same time until two zeros appear. All segments of the display
will be displayed before the two zeros appear. See Fig. 10
and 11.

Installer Setup

Number (Press

Time 

▲ 

key to

Factory-Setting

Other Choices  

(Press 

▲

 or  

▼

 key to change)

Actual

Select

change)

Display

Description

Display

Description

Setting

Temperature range
stops in cooling

35

45

Lowest setpoint
cooling can be set to

46 to 99

Temperature range (1°F
increments) cooling setpoint
can be set to

Not used

36

—

—

—

—

—

Temperature
display adjustment

37

0

No difference in
displayed temperature
and actual room
temperature

+3 thru
-3

1—Display adjusts to 1°F
higher than actual room
temperature

2—Display adjusts to 2°F
higher than actual room
temperature

3—Display adjusts to 3°F
higher than actual room
temperature

-1—Display adjusts to 1°F
lower than actual room
temperature

-2—Display adjusts to 2°F
lower than actual room
temperature

-3—Display adjusts to 3°F
lower than actual room
temperature

M6792A

TEST  NUMBER

Summary of Contents for T8524

















Reviews:

No comments