manualshive.com logo in svg

Honeywell Spyder 5 WEB-RL6N, Installation Manual, Page: 15 / 25

Share
Download
Honeywell Spyder 5 WEB-RL6N Installation Manual Download Page 15

SPYDER MODEL 5 ROOM CONTROLLERS 

−

 INSTALLATION GUIDE

 

 

15 

31-00281ES-01 (EN1B-0664GE51 R0819) 

Unoccupied Mode 

 

Fig. 146. Example "unoccupied" screens 

If 

 is displayed, the controller is in the "unoccupied" 

mode. 
The user can override the "unoccupied" mode by touching 
the upper right softkey. An intermediate screen will then 
flash for a few seconds, allowing the user to either cancel 
(upper left softkey) or confirm (upper right softkey). If the 
user neither cancels nor confirms, this will be considered a 
confirmation, and the controller will be placed in the 
"overridden to bypass" mode. If, on the other hand, the user 
cancels, the controller will revert to the "unoccupied" mode. 

If 

 is displayed, the controller is in the "occupied" 

mode. 

Standby Mode 

 

Fig. 157. Example "standby" screens 

If 

 is displayed, the controller is in the "standby" mode. 

The user can override the "standby" mode by touching the 
upper right softkey. An intermediate screen will then flash 
for a few seconds, allowing the user to either cancel (upper 
left softkey) or confirm (upper right softkey). If the user 
neither cancels nor confirms, this will be considered a 
confirmation, and the controller will be placed in the 
"overridden to bypass" mode. If, on the other hand, the user 
cancels, the controller will revert to the "standby" mode. 
 

Occupied Mode 

 

Fig. 168. Example "occupied" display 

 

Summary of Contents for Spyder 5 WEB-RL6N


























Reviews:

No comments