Honeywell Solaris MS7820, User Manual

Page: 12 / 210

Bar Code Configuration Methods xii
B
AR
C
ODE
C
ONFIGURATION
M
ETHODS
Metrologic scanners can be bar code configured in two ways: the
Single-Code Method
and the M ulti-Code Method .
Single-Code Method
Most features can be enabled or disabled using the Single-Code Method.
1. Power up the scanner.
2. Scan the bar code(s) for the desired feature(s).
3. Observe a multi-toned, “save setting” beep that indicates the configuration has
been saved to NOVRAM.
Multi-Code Method
All features can be enabled or disabled using the Multi-Code Method.
A feature marked with a “~” requires the Multi-Code Method.
1. Power up the scanner.
2. Scan
the Enter/Exit Configuration Mode bar code. [3 beeps]
3. Scan the bar code(s) for the desired feature(s). [1 beep]
4.
Scan the Enter/Exit Configuration Mode bar code [3 beeps] and
save new configuration.
Enter/Exit Configuration Mode
³ 9 9 9 9 9 9
To abort a configuration change, power off the scanner before scanning the
Enter/Exit Configuration Mode bar code.