118
Solaris 7980g User Guide
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data.
Default
=
Off
for both 2 Digit and 5 Digit Addenda.
UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use
(page 115). If you need to read codes that lead with the 1 number system, use the
UPC-E1 On
selection.
Default
=
Off.
EAN/JAN-13
<Default All EAN/JAN Settings>
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
* 5 Digit Addenda Off
UPC-E1 On
* UPC-E1 Off
Summary of Contents for Solaris 7980g
