![background image](http://html.mh-extra.com/html/honeywell/sk-fft/sk-fft_installation-and-operation-manual_153788015.webp)
Model SK-FFT Manual — P/N 54711:B2 12/18/2020
15
FFT-24 Installation
Installation
2. Attach strain relief clip to the phone cord. The strain relief clip should have about 2 ¾” of phone cord though it. See
Figure 3.6 Installing Strain Relief Clip
3. Push the strain into the hole in the dead front panel.
3.3 FFT-24 Installation
The FFT-24 expander board lets you add additional zones to the -FFT.
To install the FFT-24:
1. Open Cabinet door and dead front panel.
2. Remove power. See Appendix A: for compatible powering devices.
3. Remove blank plate and discard.
4. Mount the FFT-24 on the six mounting studs located on the inside of the dead front panel and secure using the nuts
removed from the blank plate. See Figure 3.7.
Figure 3.7 Mounting Locations for the FFT-24
mounting studs
mounting studs