Honeywell ScanPal 5100, User Manual

Page: 6 / 64

1 - 2
Safety & RF Approvals by Country:
Laser Safety Label
If the following label is attached to your product, it indicates the product contains
a laser engine or laser aimer.
Laser Eye Safety Statement: This device has been tested in accordance with
and complies with IEC60825-1(Ed. 2.0), EN60825-1:2007. Complies with 21
CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
LASER LIGHT, DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT. 1 mW MAX OUTPUT:
650nM
WARNING - use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
CB Scheme
Certified to CB Scheme IEC 60950-1:2005.
LED Safety Statement
LEDs have been tested and classified as “EXEMPT RISK GROUP” to the standard: IEC 62471.
UL and C-UL Statement
UL and C-UL listed: UL60950-1 2nd Edition, and CSA C22.2 No. 60950-1-07 2nd Edition,
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
Country Safety EMC, Radio, & SAR
U.S.A UL60950-1 FCC Part 15, Sub part B, Sub
part C
Canada C-UL CSA C22.2 No. 60950-1-07 ICES-003, RSS 210
Europe IEC 60825-1
IEC 62471
IEC 60950-1 EN55022 (CISPR 22) Class B
EN55024
EN300 328
EN301 489-1
EN301 489-17
IEC 62209-2
China CCC SRRC
India WPC/ETA
!