S9200U1000 UNIVERSAL HOT SURFACE IGNITION INTEGRATED FURNACE CONTROL
69-2075EF—01
2
Dimensions:
INSTALLATION AND
CONFIGURATION OVERVIEW
The following is an overview of the steps required to
install and configure the S9200U1000 Integrated Furnace
Control:
1.
Identify cross reference target using Table 1.
2.
Remove old device and carefully identify and mark
any wiring. See “Replacement” on page 6.
3.
Mount the S9200U1000 Integrated Furnace Con-
trol. See “Replacement” on page 6.
4.
Connect the wiring harnesses and make the wiring
connections. See “Wiring” on page 7.
5.
Configure the field settings and safety timings. See
“Safety Timings, Field Settings, and Fixed Parame-
ters” beginning on page 11.
CROSS REFERENCE
IMPORTANT
Only use the S9200U1000 on 120 Vac
applications.
See Table 1 for the replacement details for other
manufacturers’ controls. See Table 2 for replacement
details for Trane controls.
