Honeywell Rapid Eye Hybrid LT, Installation Manual

Page: 20 / 86

20
Introduction
Connecting Cameras
Connect a coaxial cable of each analog camera (maximum 4 or 8, depending on the DVR
model) to the Rapid Eye Hybrid LT DVR. Connect the first camera to Video Input 1, the
second to Video Input 2, and so on. For more information, see
Connecting a Camera , page
28 , and Cabling on page 71 .
For more information on IP camera installation and configuration, refer to the Rapid Eye™
Hybrid HD and Hybrid LT Digital Video Recorders System Administrator Guide , included on
the documentation CD. See Table 1-1 for a list of IP cameras and their supported features
on the Rapid Eye Hybrid LT V10.1 DVRs.
Supported IP Cameras
Table 1-1 lists the IP cameras that are supported by your Rapid Eye Hybrid LT V10.1 unit.
More cameras will be added in future releases. Supported camera features (for Honeywell
and supported ONVIF IP cameras) are also listed in this table.
Table 1-1 Supported IP Cameras
Supported Features
Camera Model
Software
Versions that
support
H.264
Streaming
MPEG4
Streaming
Tamper
Detection (CSD
Analytics)
Motion
Detection
GPIO PTZ
equIP HCD554IP V10.0+      
equIP HCS554IP V10.0+      
equIP HD4DIP V10.0+      
equIP HD3MDIH V10.0+      
equIP HD4MDIH V10.0+      
equIP HCD5MIH V10.0+      
HD3MDIP V10.0+      
HD4MDIP V10.0+      
ACUIX IP V10.0+      
HD44IP V10.1+      
HD45IP V10.1+      
HD54IP V10.1+      
HD55IP V10.1+      
equIP HD3HDIH V10.1+      
equIP HD4HDIH V10.1+      
equIP HCD5HIH V10.1+      
equIP HD3MWIH V10.1+      