6
Safety and Productivity Solutions
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Issue B
32313758
Figure 5. Cable Harness Mounting Dimensions Shown by Pressure Port Type (For reference only. mm/[in].)
E
Wire
colors
General
product
marking
F1: 7/16-20 UNF 1/4 inch 45° Flare Female Schrader (SAE J512)
Seal: 45° cone
Mating geometry: SAE J512
Installation torque:
17 N m [12.5 ft-lb]
Weight: 90 g [3.2 oz]
G1: G1/4 A-G (ISO 1179-3)
Seal: nitrile O-ring (included)
Mating geometry: ISO 1179-1
Installation torque:
50 N m [36.9 ft-lb]
Weight: 70 g [2.5 oz]
M1: M12 x 1.5 (ISO 6149-3)
Seal: nitrile O-ring (included)
Mating geometry:
ISO 6149-1
Installation torque:
25 N m [18.4 ft-lb]
Weight: 69 g [2.4 oz]]
N1: 1/4-18 NPT
Seal: Pipe thread
Mating geometry:
ANSI B1.20.1
Installation torque:
Two to three turns
from finger tight
Weight: 70 g [2.5 oz]
N2: 1/8-27 NPT
Seal: Pipe thread
Mating geometry:
ANSI B1.20.1
Installation torque:
Two to three turns
from finger tight
Weight: 66 g [2.3 oz]
T1: Tube
Seal: Brazing
Weight: 67 g [2.4 oz]
ø
21,6
[0.85]
1000 ±50
[39.9 ±1.9]
13,9
[0.55]
11,2
[0.44]
31,6
[1.24]
42,75
[1.683]
G1/4 A-G (ISO 1179-3)
44,1
[1.73]
13,5
[0.53]
ø
21,6
[0.85]
30,6
[1.20]
12,9
[0.51]
1000 ±50
[39.9 ±1.9]
M12 x 1.5 (ISO 6149-3)
ø
21,6
[0.85]
1000 ±50
[39.9 ±1.9]
30,6
[1.20]
45,6
[1.79]
12,9
[0.51]
15,0
[0.59]
1/4-18 NPT
ø
21,6
[0.85]
1000 ±50
[39.9 ±1.9]
31,6
[1.24]
13,9
[0.55]
10,0
[0.39]
41,6
[1.64]
1/8-27 NPT
ø
23,0
[0.91]
ø
7,3
[0.29]
ø
6,35
[0.25]
7,0
[0.27]
57,0
[2.24]
1000 ±50
[39.9 ±1.9]
92,2
[3.63]
32,2
[1.38]
Ensure this area is
protected during the
brazing process so
that temperatures
do not exceed
125 °C [257 °F].
22,0
[0.87]
Black = Ground
Red = Vsupply
White = Vout
T1
F1, G1, N1, N2, M1
ø
21,6
[0.85]
1000 ±50
[39.9 ±1.9]
45,3
[1.78]
12,2
[0.48]
ø
15,9
[0.63]
15,4
[0.61]
33,1
[1.30]
7/16-20 UNF 1/4 in 45° Flare
Female Schrader (SAE J512)
White label with
black lettering