7
7
REMOTE SENSO R
FEATURES
·
Transmits remote temperature to the main unit via radio signal
·
100 feet (30 meters) transmission range without interference
·
LCD display of measured temperature
·
Selects one of three transmission (3) channels
·
Selects temperature display in either Celsius or Fahrenheit
·
Case can be wall mounted using built-in hanger
A. LED INDICATOR
·
Flashes once when transmitting a reading to the main unit.
·
Flashes twice when battery power is low.
B. BATTERY COMPARTMENT
Holds two AA-size batteries
C. RESET
Resets all readings
D. CHANNEL switch
8
Selects the desired transmission channel
E. WALL-MOUNT RECESSED OPENING
Keeps the remote sensor on the wall
F. °C/ °F selector
Selects the temperature display in Celsius or Fahrenheit
BEFORE YOU BEGIN
·
We recommend using alkaline batteries for the remote sensor
and main unit when temperatures are above 32°F (0°C). We
recommend using lithium batteries for the remote sensor when
temperatures are below 32°F (0°C).
·
Avoid using rechargeable batteries. (Rechargeable batteries
cannot maintain correct power requirements).
·
ALWAYS install batteries in the remote sensor before the main
unit.
·
Insert batteries matching the polarity in the battery compartment
·
Press RESET after each battery change with a paper clip or wire.
·
Remove protective plastic screen from LCD display (if any).
·
During an initial setup, place the main unit close to the remote
sensor.
·
After reception is established (the remote temperature will appear
on the main unit’s display), position the remote sensor and the
main unit within the effective transmission range of 100 feet (30
meters).
·
The remote sensor can be placed indoors or outdoors,
depending on the area where the temperature is intended to
be measured. If you intend measuring outdoor temperature,
place temperature sensor outdoors
·
The main unit must be placed indoors.
