Honeywell P7650A Series Installation Instructions Manual Download Page 2

P7650A/B/U

31-00138—02

2

DIMENSIONS  

Fig. 1. 

SPECIFICATIONS

Media Compatibility: 

Dry air or inert gas

Input Power: 

Three-wire Volt mode: 24 Vac or 12-30 Vdc*
Two-wire mA mode: 12-30 Vdc*

Output Power Field-selectable: 

2-wire, loop-powered 4-20 mA**
(DC only, clipped and capped), 24 Vac/dc or 3-wire 0-

5V/0-10V***

Response Time: 

Standard: T95 in 20 sec, Fast: T95 in 2 sec, DIP switch 

selectable

Pressure Mode: 

Selectable unidirectional or bidirectional (example: uni-

directional 0 to 1 inch w.c., or bi-directional -1 to 1 inch 
w.c.), DIP switch selectable

Velocity Mode:

Velocity is set up in Feet/Minute or Meters/second

Display (Option):

Pressure mode: Signed 3-1/2 digit LCD, indicates 

pressure, overrange indicator

Velocity mode: Signed 4-1/2 digit LCD, indicates velocity, 

overrange indicator

Proof Pressure: 

3 psid  (20.6 kPa)

Burst Pressure: 

5 psid  (34.5 kPa)

Pressure Mode Accuracy: 

±1% F.S. (combined linearity and hysteresis)

Velocity Mode Accuracy: 

±90 FPM (±0.45 MS) plus 5% of measured value****

Temperature Effect: 

1” (250 Pa) models: 0.05%/°C; 10” (2.5 kPa) 

models: 0.01%/°C

(Relative to 25 °C) 0 to 50 °C (32 to 122 °F)

Zero Drift (1-year): 

1” (250 Pa) models: 2.0% max.; 10” (2.5 kPa) 

models: 0.5% max.

Zero Adjust: 

Pushbutton auto-zero and digital input (2-pos terminal 

block)

Operating Environment: 

0 to 60 °C (32 to 140 °F)

Altitude of Operation:

0 to 3000 m

Pollution Degree:

2

Humidity Range:

100% RH, non-condensing

Mounting Location:

For indoor use only.

Fittings:

Brass barb; 0.24” (6.1 mm) o.d.

Limited Warranty:

5 years

Environmental Rating:

IP65, NEMA 4

Flammability Rating:

Plastic enclosure is UL 94 5VA fire retardant ABS

Accessories:

32003169-001 4 in. Duct Pressure Pick-up Probe.
P7650L6, P7650L8, P7650L10, P7650L12, or P7650L14, 

Velocity Pick-up Probes. (Last number is probe length, 
i.e., P7650L6 has 6 inch probe, etc)

EMC Conformance: EN 61000-6-3:2007 and A1:2011 Class B, EN 

61000-6-1:2007

* Class 2 power source.
** Minimum input voltage for 4 to 20 mA operation: 250

Ω

 loop = 

12 Vdc; 500

Ω

 loop = 19 Vdc.

*** Minimum load resistance for Volt operation: 5 k

Ω

.

**** For measured values between 200 and 7000 FPM (1 and 

35 MS).

 

1-19/32

(42)

3-1/2 (88)

4-13/32

(112)

7-13/32 (188)

19/64

(7)

3-3/32

(78)

 

M37264

Summary of Contents for P7650A Series









Reviews: