Honeywell OWA 100 OneWireless, User Manual

Page: 21 / 51

OWA 3-Config Warnings-11-11-10.doc
1
3. Configuration
3.1 Safety Messages
These instruction procedures may require special precautions to ensure the safety of the personnel
performing the operations. Information that potentially raises safety issues is indicated by a warning
symbol (
). Please refer to the following safety messages before performing an operation preceded
by this symbol.
Warnings
WARNING – POTENTIAL ELECTROSTATIC CHARGING HAZARD
The OWA 100 OneWireless Adaptor enclosure is non-conductive Lexan, EXL9330
Polycarbonate and may generate an ignition-capable level of electrostatic charge
under certain extreme conditions. The user should ensure that the equipment is
not installed in a location where it may be subjected to external conditions (such as
high-pressure steam), which might cause a build-up of electrostatic charge on non-
conducting surfaces.
WARNING
Failure to follow these instructions could result in death or serious injury.
• Make sure only qualified personnel perform the installation.
• Explosions could result in death or serious injury.
• The OWA 100 OneWireless Adapter can only be opened for battery
insertion and activation, or installed in a potentially hazardous location
when the location is declared to be non-hazardous.
• Before mounting the OWA 100 OneWireless Adapter to an existing field
transmitter, verify that the instruments are installed in accordance with
applicable intrinsically safe or nonincendive field wiring practices.
• Verify that the certification parameters of the OneWireless Adapter are
consistent with the appropriate hazardous locations certifications.
Electrical shock could cause death or serious injury.
• Use extreme caution when making contact with the leads and terminals.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: This device may not cause harmful interference. This device
must accept any interference received, including interference that may cause
undesired operation.
This device must be installed to ensure a minimum antenna separation distance of
20 cm from all persons.