Honeywell OrbitCG MS7180, Installation And User Manual

Page: 10 / 52

I
NTRODUCTION
Mounting Specifications
Optional Wall/Counter Mount, PN 45-45619
Item Description Qty.
a. Locking Plate,
PN
50-50302 1
b. Base Cover,
PN
50-50301 1
c. #7 x 1.00" Wood Screw,
PN
18-18013 3
d. M3 x 8 mm Flathead Screw,
PN
18-18004 4
Figure 4. Kit Components
1.
Drill three #39 pilot holes.
Note the position Orbit CG will rest
( see Figure 5 ). Use the dimensions
provided in Figure 5 or the locking
plate as a template to drill three
#39 pilot holes in the mounting
surface.
Figure 5.
2. Attach the locking plate to the wall/counter.
Secure the locking plate to the counter/wall with the three #7 x 1.00" wood
screws provided
(see Figure 6) .
3. Attach the base plate to the Orbit CG .
Secure the base cover to the bottom of Orbit CG using the four M3 x 8 mm
screws provided (see Figure 7).
4. Mount Orbit CG to the locking plate.
Hold Orbit CG 90° clockwise from the desired position then lower it over the
locking plate until it sits flush to the countertop. Twist Orbit CG counter
clockwise 90° to lock the scanner in place (see Figure 8).
Figure 8.
Figure 7.
Figure 6.
6