Honeywell OptiCAM-IR, Installation And Setup Manual, Page: 11 / 16

5-1
S E C T I O N 5
Troubleshooting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
T T r r o o u u b b l l e e s s h h o o o o t t i i n n g g
Problem Solution
Nothing appears on
the screen.
The image on the
screen is dim.
The image on the
screen flickers.
The screen contrast is
too weak.
Check if the power cord and line connection between the camera
and monitor are connected properly,
Check whether the window is stained. If dirty, clean the lens with a
clean, soft cloth.
Check to make sure that the camera is not facing directly into the
sun or a fluorescent light. Change camera position as required.
Adjust the monitor contrast or if the camera is exposed under too
strong a light, change the camera position.