Turn on Power to F
IRST
V
ISION
Enabling F
IRST
V
ISION
to Monitor Your Building
19
F
IRST
V
ISION
™
Installation and Operation Manual
- P/N: 53034:Rev: A2 10/29/07
3.3 Turn on Power to F
IRST
V
ISION
Turn-on the power supply connected to F
IRST
V
ISION
. Refer to “F
Instructions” on page 11 for installation information
.
3.3.1 What Displays After the Initial Power Up of F
IRST
V
ISION
1. Windows® XP Embedded will start and display.
2. The software application "progress bar" will display and remain displayed until the loading of
the software application and its components are complete.
3. After the progress bar disappears; the software application will automatically start because a
shortcut to the application has been placed in the product’s Startup folder.
3.3.2 What You Should Know about F
IRST
V
ISION
IP Addresses
Your LAN IP address (setup with Windows Internet Protocol (TCP/IP) Properties) has a default of:
192.168.0.4
.
• If it is necessary to change the factory LAN IP address; refer to
for information.
The gateway that F
IRST
V
ISION
monitors (setup with Add Gateway Connection) has a factory
setting of
192.168.0.3
.
• If it is necessary to change this factory setting; refer to
“Establish Gateway Communication”
for information.
• If it is necessary to change a gateway’s IP address, refer to the gateway’s respective
installation manual.
3.3.3 What You Should Know about F
IRST
V
ISION
Windows Settings
Windows Administrator Settings
It is essential that the F
IRST
V
ISION
host computer remain configured to automatically log in the
administrator account at startup, without asking for a password.
Screen Saver Settings
Monitor Power
A Monitor Power selection should NOT be changed from the factory default settings, which all are
set to Never (always on), because any setting will prevent the software application from starting
automatically after a power loss.
NOTE:
Do NOT attempt to stop this loading.
NOTE:
Do NOT remove this shortcut.
NOTE:
Do NOT change the factory boot setup for F
IRST
V
ISION
’s host computer (that is,
administrator is automatically logged in at startup), or add any user accounts.
