Honeywell Notifier FirstCommand Series, Instruction Manual

Page: 59 / 96

Notifier FirstCommand Series Manual — P/N LS10001-001NF-E:H 1/8/2018 59
Main Menu - Informational Programming
3.4 Main Menu - Informational
From the main screen, programmed information for the 24 possible speaker circuits can be viewed without accidentally making changes.
Viewing this information does
not require login to the system.
3.4.1 Informational
Speaker Circuit Buttons
The Speaker Circuit Button Assignment page reflects what has been programmed into the Address Assignment page. (Refer to “Speaker
Circuit Address Assignment” on page 55.) Based on the example above, the NFC system’s primary operator console has four (4) pro-
grammed speaker circuits, a remote amplifier at address 20 has two (2) speaker circuits, and a second remote amplifier at address 21 has
three (3) speaker circuits. There is a maximum of 24 speaker circuits allowed in the system.
Figure 3.11 Main Menu
m
a
in
_
m
e
n
u
.j
p
g
Figure 3.12 Speaker Circuit Button Assignments
b
u
tt
o
n
a
s
s
ig
n
.j
p
g