Honeywell Notifier ACPS-610/E Manual Download Page 30 | Manualshive

Page: 30 / 56

background image

30

ACPS-610/E Manual —

P/N 53018:A1 07/31/2007

Configuration and Programming

Programming the ACPS-610

3.2.4 Working Online

In addition to creating and opening databases on your local drive, you may modify any ACPS-610
that is directly connected to your PC with the PK-PPS programming utility. When you are in the
program and you are connected via the USB to a power supply, that power supply is represented by
the icon in the left window. Click on this icon to see the power supply’s current configuration and
version information (Figure 3.3).

When you right-click on the ACPS-610 icon, you have three work options:

S

AVE

Select this option to save the power supply’s current configuration as a database file

(*.pdb) on your local drive.

M

ODIFY

Select this option to edit the power supply’s current configuration. After you make all

of your changes, your new database will overwrite the one in the ACPS-610. You will also
have the option to save this database to your local drive.

D

OWNLOAD

Select this option to download a database, application, or bootloader file to the

power supply. See Section 3.2.5.

Figure 3.3 PK-PPS: Current Database

3.2.5 Downloading to the ACPS-610

1.

Check to make sure that the PC is connected to the ACPS-610 (Section 3.2.2).

2.

Right click on the ACPS-610 icon, select

D

OWNLOAD

and choose the type of application

you wish to download or select Download from the Operation menu.

You may download a program database file (*.pdb), an application file (*.hex), or a
bootloader file (*.hex).

3.

Use the Browse button to navigate to the file you wish to download.

4.

Open the file to download it to the ACPS-610.

5.

Disconnect USB cable

AFTER

programming is complete.

3.2.6 ACPS-610 Configuration

PK-PPS sets parameters for the ACPS-610 and all of its outputs. Selections must be made in order shown
below. Lower level options will not be available until upper level options have been selected.

The worksheet’s summary section displays all selections. When programming is complete, PK-PPS
displays the SLC address consumption that is result of your selections.

NOTE:

Start the PK-PPS utility before connecting to the power supply.

PK-

PP

S_

Cu

rr

e

n

tD

B

a

.j

pg

Power
Supply
Icon

Database
and
Firmware
Version
Information

«
...
28
29
30
31
32
...
»

Summary of Contents for Notifier ACPS-610/E

























































Reviews:

No comments

Related manuals for Notifier ACPS-610/E

Brand: Eaton Pages: 12

Brand: Fein Pages: 53

Brand: HANYOUNG NUX Pages: 2

Brand: King Industrial Pages: 7

Brand: EGAmaster Pages: 10

Boostamatic 4000

Brand: Stuart Pages: 20

Brand: Proto Pages: 8

Brand: M-system Pages: 3

Brand: DUCTMATE Pages: 12

Brand: Trotec Pages: 10

Brand: Hilti Pages: 4

Brand: Parkside Pages: 88

Brand: On-Q Pages: 2

Brand: Cantek Pages: 29

Brand: Kärcher Pages: 68

Brand: Dixon Automatic Tool Pages: 11

Brand: Far Tools Pages: 52

Brand: King Canada Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands