background image

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make 
changes in specifications and other information contained in 
this document without prior notice, and the reader should in all 
cases consult HII to determine whether any such changes have 
been made. The information in this publication does not 
represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or 
omissions contained herein; nor for incidental or consequential 
damages resulting from the furnishing, performance, or use of 
this material. HII disclaims all responsibility for the selection 
and use of software and/or hardware to achieve intended 
results.

This document contains proprietary information that is 
protected by copyright. All rights are reserved. No part of this 
document may be photocopied, reproduced, or translated into 
another language without the prior written consent of HII.

 2021 Honeywell International Inc. All rights reserved.

Web Address: 

sps.honeywell.com

Customer Support

Technical Assistance

Go to 

sps.honeywell.com

 and select 

Support > Productivity

 to 

find a host of options to help you quickly find the support you 
need and/or who to contact.

Summary of Contents for Multi-Bay Battery Charger









Reviews: