Honeywell MMU Installation Instructions Manual Download Page 19

HONEYWELL MULTIPLE METER UNITS (MMU)

19

62-0400-01

10.0 METER LIMITED WARRANTY

Subject to the exclusions listed below, Honeywell will either repair or replace (at its 

option) any product that it manufactures and which contains a defect in material or 

workmanship.

The following exclusions apply:

1. This Limited Warranty is only effective for a period of (5) five years following the 

date of manufacture when installed in accordance with manufacturer’s instruc-

tions by qualified personnel. 

2. Honeywell must be notified of the defect within ninety (90) days after the defect 

becomes apparent or known. 

3. Buyer’s remedies shall be limited to repair or replacement of the product or com-

ponent which failed to conform to Honeywell’s express warranty set forth above. 

4. Buyer shall be responsible for all freight costs and shall bear all risk of loss or 

damage to returned goods while in transit. 

5. This Limited Warranty does not cover installation, removal, reinstallation, or labor 

costs, and excludes normal wear and tear. Buyer shall provide labor for the 

removal of the defective component or item and installation of its replacement at 

no charge to Honeywell. 

6. This Limited Warranty does not cover any product if: (i) a product is altered or 

modified from its original manufactured condition, (ii) any repairs, alterations or 

other work has been performed by Buyer or others on such item, other than work 

performed with Honeywell’s authorization and according to its approved proce-

dures; (iii) the alleged defect is a result of abuse, misuse, improper maintenance, 

improper installation, accident or the negligence of any party; (iv) damaged as a 

result of events beyond Honeywell’s control or other force majeure events or (v) 

used in conjunction with equipment, components, accessories, parts or materi-

als not supplied or approved by Honeywell. This Limited Warranty is limited to 

the obligation to repair or replace the manufactured product. This is the sole and 

exclusive remedy for any breach of warranty. 

7. IN NO EVENT SHALL HONEYWELL BE LIABLE FOR ANY INDIRECT, INCI-

DENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES (INCLUD-

ING ANY DAMAGE FOR LOST PROFITS) ARISING OUT OF OR IN 

CONNECTION WITH THE FURNISHING OF PRODUCTS, PARTS OR SER-

VICES, OR THE PERFORMANCE, USE OF, OR INABILITY TO USE ANY 

PRODUCTS, PARTS OR SERVICES, SALE OF OR OTHERWISE, WHETHER 

BASED IN CONTRACT, WARRANTY, TORT, INCLUDING WITHOUT LIMITA-

TION, NEGLIGENCE, OR ANY OTHER LEGAL OR EQUITABLE THEORY. 

EXCEPT AS EXPRESSLY PROVIDED HEREIN, HONEYWELL MAKES NO 

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED WITH RESPECT TO ANY 

PRODUCTS, PARTS OR SERVICES PROVIDED BY HONEYWELL INCLUD-

ING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

8. PRODUCTS OR COMPONENTS DISTRIBUTED, BUT NOT MANUFACTURED, 

BY HONEYWELL ARE NOT WARRANTED BY HONEYWELL AND BUYER 

MUST INSTEAD RELY ON THE REPRESENTATIONS AND WARRANTIES, IF 

ANY, PROVIDED DIRECTLY TO THE BUYER BY THE MANUFACTURER OF 

SUCH PRODUCT OR COMPONENT.

Summary of Contents for MMU





















Reviews: