Honeywell ML7984B User Manual Download Page 2

ML7984B 

SPECIFICATIONS • ORDERING INFORMATION 

Specifications 

IMPORTANT: 

The specifications given in this publication  do not include 
normal manufacturing tolerances. Therefore, an individual 
unit may not exactly match the listed specifications. Also, 
this product is tested and calibrated under closely controlled 
conditions and some minor differences in performance can 
be expected if those conditions are changed. 

Ambient Rating: 

Operating Temperature: 
0

° 

C to 55

° 

C (32

° 

F to 130

° 

F) 

Shipping Temperature: 
-40

° 

C to +65

° 

C (-40

° 

F to 150

° 

F) 

Relative Humidity: 
15% to 95% at 40

° 

C (104

° 

F) 

Acoustic Noise: 

55 dBA max. Sound Pressure Level at 1 m (39") distance. 

Electrical Ratings: 

Power supply/consumption: 
24V (Nominal), 50/60Hz or 
24 to 28 Vdc 
6VA(Running), 12VA(Valve seating) 

Input Signal: 

PWM: 10-24Vac or Vdc non-directional pulses 
Analog: 2-10Vdc 

Input Impedance: 

20 K

Ω 

Shipping Weight: 

Approx. 1 kg  (2.2 lbs) 

Accessories/Parts: 

272630A--Auxiliary switch assembly (1-SPDT) 
272630B--Auxiliary switch assembly (2-SPDT) 
40003793-003--Mounting hardware bag assembly 

Mechanical Ratings: 

Stroke--19mm (3/4") or less 
Stroke timing-- Approx. 63 seconds for 3/4" stroke 
Closing Force-- 710N (160 lbs.) Nominal* 

*Rating applies to both directions. 

Performance Specifications: 

Life Expectancy-- (at rated load and power conditions) 
50,000 full stroke cycles plus 
1,000,000 repositions at 10% stem travel or 10 years, 
whichever occurs first. 

Note: rapid repositioning will result in reduced service 
life of the actuator. 

Ordering Information 

When purchasing replacement and modernization products from your wholesaler or distributor, refer to the price sheets 
for complete ordering number, or specify-­

1.  Model number. 
2.  Valve body type and model number. 
3.  Accessories, if desired. 

If you have additional questions, need further information, or would like to comment on our products or services, please 
write or phone: 

1.  Your local Honeywell Home and Building Control Sales 

O

ffice ( check white pages of your phone directory ). 

2.  Home and Building Control Customer Service Department 

Honeywell Limited/Honeywell 

Limitée 

35 Dynamic Drive 
Scarborough

, Ontario 

Canada  M

1V 4Z9 

In U.S.A.  --

Honeywell

1

8

85 Douglas Drive North, Minneapolis, Minnesota 55422-4386 

International Sales Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, 
Japan, Mexico, Netherlands, Spain, 

Taiwan, 

United Kingdom, U.S.A.

 2 

Summary of Contents for ML7984B







Reviews: