Honeywell Minitrend QX User Manual Download Page 40

Page: 40 / 324

43-TV-25-30 Iss.6 GLO Aug 07 UK

Recorder Functionality

•

X Series

recorders provide flexible electronic data acquisition and recording in a high func-

tionality instrument.

Minitrend QX

is a DIN standard 144mm format recorder with a 5.5”

QVGA display and the

Multitrend SX

is a large 12.1” diagonal display format recorder. The

eZtrend QXe

is a DIN standard 144mm format recorder with a 5” QVGA display.

• The

Minitrend QX

has up to 16 Analogue inputs, and the

Multitrend SX

has up to 48 Ana-

logue inputs and the

eZtrend QXe

has up to 12 Analogue inputs.

•

Minitrend QX

and the

Multitrend SX

has

70Mb to 1850MB of expandible non-volatile

flash memory available plus additional removable storage media, the

eZtrend QXe

has

70Mb to 400MB.

• All recorders use digital colour TFT LCD screens to provide easy to read displays with wide

viewing angles for the best all around data viewing.

• The touch screen operator interface provides fast, easy access to the recorder menus mak-

ing set up and data analysis quick and efficient. Navigation through the menus and text entry
are direct and intuitive.

Example of a recorder menu path from the Main Menu to change the Pen Scale configuration with clear rapid navigation

Summary of Contents for Minitrend QX





































































































































































































































































































































Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands

Honeywell Minitrend QX, User Manual

Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands