background image

28

MILLER

®

 FALL PROTECTION PRODUCTS

TOTAL SATISFACTION ASSURANCE

At Honeywell Safety Products and its predecessors, we have been providing quality Miller brand 

fall protection equipment to millions of workers worldwide since 1945.

LIMITED LIFETIME WARRANTY

BACKED BY OVER 65 YEARS IN THE FALL PROTECTION BUSINESS

     

We sincerely believe that our fall protection equipment is the best in the world.  

Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured

to the highest standards. Miller fall protection products are tested to withstand normal wear and tear,

but are not indestructible and can be damaged by misuse. 

Our Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product. 

     

In the unlikely event that you should discover defects in either workmanship or materials, 

under our Limited Lifetime Warranty, we will repair or replace the product at our expense. 

If a replacement is necessary and your product is no longer available, a comparable product will be substituted. 

Should a product issue surface, contact us at 800.873.5242.

     

Manufacturing specifications are subject to change without notice. 

PRODUITS MILLER

®

 FALL PROTECTION

ASSURANCE DE SATISFACTION TOTALE

Honeywell Safety Products et ses prédécesseurs offrent les équipements antichute de marque Miller 

de qualité à des millions de travailleurs dans le monde entier depuis 1945.

GARANTIE LIMITÉE À VIE

ASSURÉE GRÂCE À PLUS DE 65 ANS PASSÉS DANS LE DOMAINE DE LA PROTECTION CONTRE LES CHUTES

    

Nous croyons sincèrement que notre équipement de protection contre les chutes est le meilleur au monde. Nos 

produits sont soumis à des tests rigoureux, afin d’assurer que les équipements de protection contre 

les chutes dans lesquels vous avez confiance sont fabriqués selon les normes les plus exigeantes. 

Les produits de protection contre les chutes Miller sont soumis à des essais pour vérifier qu’ils résistent à une usure 

normale; ils ne sont cependant pas indestructibles et peuvent s’endommager en cas de mauvaise utilisation. Notre 

garantie limitée à vie ne s’applique pas à l’usure normale ou à un usage abusif du produit.

Dans le cas peu probable où vous découvririez des défauts, soit de fabrication, soit de matériau, 

dans le cadre de notre garantie à vie, nous réparerons ou remplacerons le produit à nos frais. 

En cas de remplacement, si votre produit n’est plus offert, vous recevrez un produit comparable. 

En cas de problème sur un produit, nous contacter au 800-873-5242.

Les caractéristiques de fabrication peuvent être modifiées sans préavis.

PRODUCTOS ANTICAÍDAS MILLER

®

GARANTÍA DE SATISFACCIÓN TOTAL

En Honeywell Safety Products y sus predecesores, hemos estado brindando la calidad de la marca Miller en 

equipos de protección de caída a millones de trabajadores alrededor del mundo desde 1945.

GARANTÍA LIMITADA DE POR VIDA

NOS RESPALDAN MÁS DE 65 AÑOS EN LA FABRICACIÓN DE EQUIPO ANTICAÍDAS

    

Sinceramente creemos que su equipo de protección contra caídas es el mejor del mundo. Nuestros productos resisten 

rigurosas pruebas para garantizar que el equipo de protección contra caídas en el que usted confía está fabricado de 

conformidad con las normas más elevadas. Los productos anticaídas Miller son sometidos a pruebas para que resistan el 

desgaste normal, pero no son indestructibles y su incorrecta utilización puede dañarlos. 

Nuestra Garantía limitada de por vida no se aplica al desgaste normal ni al maltrato del producto. 

En el poco probable caso de que usted descubriera defectos de mano de obra o materiales, por nuestra Garantía lim-

itada de por vida, repararemos o sustituiremos el producto por cuenta nuestra. Si un reemplazo es necesario y nuestro 

producto ya no está disponible, se lo sustituiremos por otro comparable. 

En caso de que surja un problema con el producto, contáctenos al 800.873.5242.

Las especificaciones de fabricación están sujetas a modificaciones sin previo aviso.

Summary of Contents for Miller RACDNC-TOOL































Reviews: