Also, you do not need to enter a time and
temperature program for all periods if your
schedule does not require it. For example, a
house that is occupied during weekdays would
only require programs for “WAKE” and
“SLEEP.”
If no program is entered for the weekends,
the thermostat will operate on the weekday
"SLEEP" program all weekend.
When pressing the keys, use the ball of
your finger or a soft pencil eraser. Use of
sharp fingernails or pencil points may damage
the keypad.
If you make an error at any time during
programming, just press the RUN PROGRAM
key, and continue again at the step where you
left off.
“SLEEP” is the time period you can set for
an energy-saving temperature while you are
sleeping. (Again, lower heat or higher cool.
For more comfortable sleeping, some
people choose not to raise the cool tem-
perature during the night.)
You will set one schedule for weekdays
and another for weekends, because your
requirements will probably be different for
each. Also, during weekends only the “WAKE”
and “SLEEP” time periods are available.
Fill in the times and temperatures you
desire for weekdays and weekends. If you
decide not to program the thermostat, it will
automatically control heating at 68
°
F [20
°
C],
and cooling at 78
°
F [26
°
C], 24 hours a day.
STEP 4
Program The Thermostat
After the batteries are installed, the
thermostat can be easily programmed in your
hand before it is installed on the wall.
If you would prefer to program the thermo-
stat after it is installed on the wall, skip to page
16, and return later to this programming
section.
The following personal programming chart
(pages 10 to 11) may be helpful for planning
your program schedule of time and tempera-
ture settings for various times of the day.
Four time periods are available during
weekdays—“WAKE,” “LEAVE,” “RETURN,”
and “SLEEP.” These periods can be seen
individually on the display as you press the
SET SCHEDULE key.
“WAKE” is the time period you want the
house at a comfortable temperature when
you get up and while you get ready for
work or school. (This will be a higher
temperature during heating season, or a
lower temperature during cooling season.)
“LEAVE” is the time period you can set for
an energy-saving temperature while you are
away at work or school. (This will be a lower
temperature during heating season, or a
higher temperature during cooling season.)
“RETURN” is the time period you want the
house at a comfortable temperature for
activities before bedtime. (Again, higher
heat or lower cool.)
8
9
PROGRAMMING