LTE-X
Series Installation and Setup Guide
– 6 –
Using the AlarmNet 360 Website
To program the communicator via the website (if you are already signed up for this service), go to:
Alarmnet360.com (https://services.alarmnet.com/AlarmNet360/AlarmNetDirectV)
If you are not signed up for this service, click on “Dealer Sign-Up" and follow the instructions. Log in and follow the on-
screen prompts. Please have the following information available when programming the communicator:
•
Primary City ID (two-digit number), obtained from your monitoring station.
•
Primary Central Station ID (two-digit number), obtained from your monitoring station.
•
Primary Subscriber ID (four-digit number), obtained from your monitoring station.
•
Communicator’s MAC ID and MAC CRC number (located on the box and inside the communicator).
After programming is complete, the communicator must be registered. Refer to the
Register the Module
topic.
Using the 7720P Programming Tool
Ensure the communicator is powered, and connect the
7720P Programming Tool.
Each key has two possible functions; a Normal function and
a Shift function.
•
To perform a Normal key function, simply press
the desired key.
•
To perform a Shift function, press the [shift] key,
then press the appropriate key.
The following table lists each normal and shift key function.
7720P Normal and Shift Key (shift LED lit) Functions
KEY
NORMAL KEY FUNCTION
SHIFT + KEY FUNCTION
BS/ESC
[BS]: Press to delete entry
[ESC]: Press to quit program mode; also
can reset programming defaults.
*
↓
/
↑
[
↓
]: Scroll down programming
[
↑
]: Scroll up programming
N/Y
[N]: Press for "NO" answer
[Y]: Press for "YES" answer
SHIFT
Press before pressing a SHIFT key function. Will light SHIFT LED. LED goes
out once a key is pressed. Press again for each SHIFT function desired.
1/A
[1]: For entering the number 1
[A]: For entering letter A
2/B
[2]: For entering the number 2
[B]: For entering letter B
3/C
[3]: For entering the number 3
[C]: For entering letter C
4/D
[4]: For entering the number 4
[D]: For entering letter D
5/E
[5]: For entering the number 5
[E]: For entering letter E
6/F
[6]: For entering the number 6
[F]: For entering letter F
7/S
[7]: For entering the number 7
[S]: For entering letter S
8/T
[8]: For entering the number 8
[T]: For entering letter T
9/X
[9]: For entering the number 9
[X]: For entering letter X
SPACE
[SPACE]: For scrolling option list
No SHIFT function
0
[0]: For entering the number 0
No SHIFT function
#/ENTER
[#/ENTER]: Starts programming
mode; Press to accept entries
No SHIFT function
*
Active only when the "Exit Programming Mode" prompt is displayed.