manualshive.com logo in svg

Honeywell Limitless WGLA Series, Installation And Technical Manual, Page: 12 / 46

Share
Download
Honeywell Limitless WGLA Series Installation And Technical Manual Download Page 12

Limitless™ WGLA Series  

Issue 2

  50051863 

 

Honeywell Sensing and Control 

8 

2.7.3

  Radio Frequency (RF) Safety Statement (FCC & IC) 

 
To comply with FCC’s and Industry Canada’s RF exposure requirements, the following antenna installation and 
device operating configurations must be satisfied.  

•

 

Remote antenna for this unit must be fixed and mounted on outdoor permanent structures with a 
separation distance between any other antenna(s) of greater than 20cm and a separation distance of at 
least 20 cm [7.87 in] from all persons.  

•

 

Furthermore, when using an integral antenna with the WGLA, it must not be co-located with any other 
antenna or transmitter device and have a separation distance of at least 20 cm [7.87 in] from all 
persons.  

 

2.7.4

  European Restrictions 

•

 

Information regarding national restrictions can be found in document: ERC/REC 70-03 (Relating to the use 
of short-range devices including appendixes and annexes). Documentation may be found in the document 
database in the European Communication’s office. 

•

 

 

Summary of Contents for Limitless WGLA Series















































Reviews:

No comments