Honeywell LeaderLine DPR 100 C, Product Manual

Page: 192 / 228

10-12
10. TROUBLESHOOTING
10.2.12 SYMPTOM : Too much space between points (Multipoint recorder only)
POSSIBLE CAUSE CORRECTIVE ACTION
Check the chart speed
It could be too high for the application.
Reconfigure chart speed.
10.2.13 SYMPTOM : No communication with PC loader
POSSIBLE CAUSE CORRECTIVE ACTION
User error
See section 9.
Ground wiring not connected. It is mandatory to connect the ground wiring.
If you choose pen recorder instead of
multipoint recorder, you have a
communication error.
Select correct type of recorder.
Interface is not operative.
Replace mother board. (Refer to CK 152)
No response from device. Check wiring (connection, ...)
of switched PC loader. Replace PC loader box.
Incompatble version of PC Windows
Operating System Use compatible version of Windows Operating
System.
10.2.14 SYMPTOM : The printed traces are unstable
POSSIBLE CAUSE CORRECTIVE ACTION
The chart paper is not in accordance with
our specifications.
Fit correct chart.
Verify the 0 % and the 100 % printer
calibration.
Reconfigure.
The printer motor is loosing steps. Clean the bar on which the printing carriage
moves with a dry piece of cloth.