Honeywell GmbH
15
MU1H-1408GE23 R0305
GB
8. Operation
8.1 Control Buttons, Display and Indicators
4
Service indicator
LED on:
Valve in service
LED flashing:
Regeneration on set time
(
☞
Chapter 9.2.2)
Program mode entered
Program indicator
Regeneration
button
Flow indicator
LED flashing: Water flow
Setting buttons
Set value
Set value
downwards
upwards
(
☞
Chapter 9.2)
Brine refill
LED on: active phase
Reverse rinsingn
LED on: active phase
Slow rinse
LED on: active phase
Rapid rinse
LED on: active phase
8.2 Display during Operation
During normal operation the time and residual capacity
are displayed alternately.
8.3 Display during Regeneration
During regeneration the active regeneration phase is
displayed. In addition to the phase number the remai-
ning time of the active regeneration phase is also dis-
played. After all 4 regeneration phases have been
completed, the water conditioning device returns to
normal operation.
8.4 "Bypass" function
8.4.1 "Bypass" position (Fig. 3)
In this position the raw water is not treated in the water
conditioning device.
The raw water runs, via the bypass valve, through the
connection adaptor back into the drinking water supply.
8.4.2 "Service" position (Fig. 3)
In this position the raw water is treated in the water
conditioning device.
8.4.3 Start-Up operation
For the first 1-2 week running period the brand-new
water conditioning device is in start-up operation.
During this period noise development can occur during
regeneration but will automatically disappear after ap-
prox. 1-2 weeks.
9. Settings
9.1 Time
1. Set the time via the and buttons.
The clock runs quicker when the and but-
tons are held pressed.
9.2 Control valve
Time
Residual volume (litres)
Regnereration Phase 2, Remaining time 27 Minutes
i
Input: 24-hour mode
Time
i
All settings at the control valve have to be ente-
red in the check list!
WARNING!
Incorrect parameter changes can lead to sub-
stantial property damages!
i
In order to accept changes for the control valve
settings, run the programming until the end
☞
proceed with the button!