20
Installing the Camera
Figure 1-6
Pendant Dome Housing Installation
a.
Insert the field wiring (data, power, video, and alarm) from the mount through
the threaded nipple on the pendant housing.
b.
Carefully thread the housing into the mount.
5.
See
for information on connecting the field
wiring to the terminal strips on the interface board in the housing.
6.
See
Installing the Camera Assembly
for information on installing the
camera assembly and
Installing the Lower Dome
on page
23
for information on
installing the lower dome.
Connecting the Cables
1.
Follow
for the wiring connection.
Figure 1-7
Wiring
2.
Connect the power/video cable from the gimbal assembly to the camera board (see
).
1.5” NPT threaded nipple
Route field wiring
from mount
Coaxial Cables
UTP Cables
Video: Unshielded
Twisted Pair wire
Video: female BNC
Power
red +
connect to red +
black -
connect to ground
Power: 2.1 mm
male jack center
Summary of Contents for JOSI-DBC012-N11
