Honeywell
Figure 11
The screen displays “Scanning” after a while the
front panel and motherboard are not linked by a
serial port cable (in 1 minute).
Figure 12
Shut down
Turn off the switch on the rear panel (No.12 in
Figure 2-2
). It costs about 15 seconds to end the
programs before displaying “Shutting down…”.
•
If there is no key entry within 30 seconds, the screen automatically
returns to the idle-mode display (see
Figure 2
).
Note
•
The system checks the front-panel screen at 0:0:0 every midnight;
the screen turns on for 2 seconds, turns off for 2 seconds, and
then returns to the idle-mode mode.
26
Summary of Contents for IP Receiver
Page 2: ......
