Honeywell IN-S Series, Instruction Manual

Page: 13 / 96

Honeywell
73024353c © Elster GmbH | All rights reserved. Subject to modification 13
En
g
li
s
h
2. Structure and function
The products IN-Sxx / S1xRx / S2xRx / QA E1 / RVG-ST E1 are low-frequency
pulse generators for turbine and rotary gas meters from Elster/Honeywell.
The versions IN-Sxx can be attached to the index from the outside. The
versions S1xRx / S2xRx / QA E1 / RVG-ST E1 are integrated in the index.
2.1 Device description
The pulse generators consist of one series connection per channel
comprising a reed switch and a resistor. The reed switch is driven by a
magnet which is located on the inside of the gas meter index. The rotation of
the magnet usually corresponds to the rotation of the last digit roller of the
mechanical index.
When the magnet triggers the reed switch, the attached electrical circuit is
closed. A closure corresponds to one pulse.
2.2 Connection configurations
Type Version Terminals
IN-S10
IN-S10K
IN-S10V
6-core cable
E1 = brown (+) / white (-)
E2 = green (+) / yellow (-)
PCM = grey (+) / pink (-)
IN-S10A 4-core cable
E1 = brown (+) / white (-)
PCM = green (+) / yellow (-)
IN-S11
S1xR3
S2xR3
RVG-ST 2xE1
6-pin plug
E1 = 1(+) / 2(-)
E2 = 5(+) / 6(-)
PCM = 3(+) / 4(-)
IN-S11F 6-pin plug
BF = 4(+) / 6(-)
BF = 3(+) / 5(-)
PCM = 1(+) / 2(-)