IH25 Bluetooth UHF RFID Reader
7
Reading RFID Tags
1.
Turn on power to the reader and it beeps one time.
2.
Power on the mobile terminal and launch BCC RFID APP. Tap
on the right top
corner of Connect screen and select Barcode Way and scan the QR code on the
label attached at the bottom of the reader’s main body.
3.
Press MODE button and release within 3 seconds to check IH25’s operation mode.
If RFID LED lights up, it means IH25 works in RFID mode; If 1D/2D LED lights up,
it means IH25 works in Barcode mode. Press and hold the MODE button for at
least 3 seconds to switch to RFID mode.
4.
Press the trigger button to read tags.
Note
•
The Barcode Way is only supported by Honeywell’s mobile device. Please refer
to another way of connection on page 11.
•
Make sure to switch on the Bluetooth function and
Location (Settings
Security & location
Location) on mobile before connecting. Otherwise, the
connection fails all the time.
•
RFID tags can be read when they are in range. The range (typically 0.2ft—20ft
)
at which a tag can be read depends on the tag type and size and the number of
tags in the field
.
