8
IH25 Bluetooth UHF RFID Reader
MODE Button and Status Indicators
Press the MODE button to turn on the current mode light.
Release the button within three seconds. The mode light turns
off.
Press and hold the MODE button for at least three seconds to
switch between 1D/2D and RFID mode. The current mode light
is on.
Release the button. The current mode light turns off.
Solid amber: Charging
Solid green: Fully charged
Red flash/Green and amber flash alternately: Charge error
Solid red: Battery low warning (<20% capacity remaining.)
Blue slow flash: Bluetooth disconnected (two beeps when
disconnected from PDA)
Solid blue: Bluetooth connected (one beep when
connected successfully)