IF2 Network Reader User Guide
45
Open a Serial Connection to the IF2
If you are opening a serial connection to the IF2, you need:
•
a null-modem cable (P/N 059167).
•
a communications program such as HyperTerminal.
Note:
If you have Microsoft ActiveSync running on your desktop PC, disable ActiveSync to
make the serial port available.
1. Connect the null-modem cable from the serial port on the IF2 to a serial port on
your PC.
2. Start the communications program and configure the serial port
communications parameters to:
•
Bits per second: 115200
•
Data bits: 8
•
Parity: None
•
Stop bit: 1
•
Flow control: None
3. Connect the IF2 to power. The IF2 boots as soon as you apply power. In about a
minute, the message “Loading System” appears as the IF2 initializes, and in
another minute or two the login message appears.
The serial connection is established. From here you can do these tasks:
•
You can assign an initial IP address to the IF2 for configuration. For help, see
"Assign an Initial IP Address" on page 5
•
You can restore default settings. For help, see
"Restore Default Settings with
a Serial Connection" on page 50
.
•
You can open a BRI session.
Open a USB Connection to the IF2
If you are connecting the IF2 using a USB connection, you need:
•
a USB cable.
•
to create a folder with a gserial.inf and a usbser.sys file.
Note:
USB is not supported on the IF2 with Expanded Memory Option.
Summary of Contents for IF2
