Honeywell HWC-S363-RV, Instruction Manual, Page: 19 / 42

19
PTZ SPEED DOME CAMERAS
5. Moving the Joystick to the right/ left (or twist CCW/CW) to scroll Tour, Pattern, and
Auto Scan and Preset functions.
6. Select Function Number by pulling the Joystick down, and twist the Joystick to the
CCW/CW (or turn right/left). The executable function number will be scrolled. If
selected function is not programmed, it won’t change. Go to setup function first.
7. Pull the Joystick down and twist the Joystick to CCW/CW (or twist the joystick to
right/left) to set waiting time.
8. Highlight Operation option by pulling the Joystick down. Choose operation status
Enable or Disable by moving the Joystick to the right or to the left (or twist
CCW/CW).
1.2 Preset ( MENU => Function => Preset or Short Cut:PRST )
Preset stores pan, tilt, zoom, focus and iris settings. Once programmed, pressing
combination of
0 ~ 9 numbers and the Preset button on the controller should automatically
call up the preset position. Presets may be assigned to alarm actions or as the “home”
position for the dome camera.
Highlight Preset and then move the joystick to the right to enter Preset menu.
There are 30 pages of preset programming menu. Each page can hold up to 8 presets.
Locate the
“Prev Next ”, preset menu pages can be scrolled by moving the Joystick to
the Left or Right on the “ Prev Next ” .
FCB-EX1020(P) EM-363SN/363SP
HZM-363N/363P
Function
Home Function
Preset
Pattern
Scan
Tour
Run Function
Exit
PRESET 01/30
No. F I B W TITLE
001 A A F F xxxxxxxxxxxxxxxx
002 M M O F ----------------
003 - - - - ----------------
004 - - - - ----------------
005 - - - - ----------------
006 - - - - ----------------
007 - - - - ----------------
008 - - - - ----------------
Prev Next
Save And Exit
PRESET 01/30
No. F I B TITLE
001 A A F xxxxxxxxxxxxxxxx
002 M M O ----------------
003 - - - ----------------
004 - - - ----------------
005 - - - ----------------
006 - - - ----------------
007 - - - ----------------
008 - - - ----------------
Prev Next
Save And Exit