AIR FILTER MAINTENANCE
7-4
www.honeywellgenerators.com
Honeywell Portable Electrical Generator Service Manual
3.
Remove foam air filter(s).
4.
Wash air filter(s) in a solution of household soap and
warm water.
5.
Rinse parts thoroughly with water.
6.
Using a clean, absorbent cloth, squeeze air filter dry,
being careful not to twist or tear the filter.
7.
Coat the air filter with clean engine oil.
8.
Squeeze out excess oil.
NOTE:
Engine will smoke during initial start-up if too much oil is
left in filter.
9.
Reassemble the air cleaner assembly.
For Model Numbers Ending in “L”:
9A
. Reinstall the light grey foam air filter.
9B.
Reinstall the dark grey foam air filter.
9C.
Reinstall the air cleaner cover.
For Non-L Models:
9A.
Reinstall the metal air filter plate in the support
brackets if it fell out during air filter removal.
9B.
Reinstall air filter.
9C.
Reinstall the air cleaner cover.
FIGURE 7-4:
Air Filter Removal
FIGURE 7-5:
Wash Air Filter
FIGURE 7-6:
Dry Air Filter
FIGURE 7-7:
Oil Air Filter
FIGURE 7-8:
Excess Oil Removal
Frequent or prolonged contact with engine oil may cause
skin cancer.
• Thoroughly wash hands and any areas of skin exposed
to used oil with soap and water.
CAUTION
FIGURE 7-9:
Air Filter Installation—Model Numbers Ending in “L”
(filter shape varies by model)
FIGURE 7-10:
Air Filter Plate Installation—Non-L Models
(air filter plate shape varies by model)
Summary of Contents for HW3000/L
Page 2: ... ...
