background image

12" OSCILLATING TABLE FAN

Model HTF1220 Series 

16" OSCILLATING STAND FAN

Model HSF1630 Series

When using electrical appliances,  

basic precautions should always  

be followed to reduce the risk of  

fire, electric shock, and injury to  

persons, including the following:

1.

  Use this fan only as described in this manual. 

Other use not recommended may cause  

fire, electric shock or injury to persons.

2.

  This product is intended for household  

use 

ONLY

 and not for commercial,  

industrial or outdoor use. 

3.

  To protect against electric shock, 

DO NOT

 

place fan in window, immerse unit, plug or  

cord in water or spray with liquids.

4.

  This appliance has a polarized plug (one blade  

is wider than the other). To reduce the risk of 

shock, this plug is intended to fit only one way  

in a polarized outlet. If the plug does not fit 

fully in the outlet, reverse the plug. If it still 

does not fit, contact a qualified electrician. 

DO NOT

 attempt to defeat this safety feature.

5.

  Close supervision is necessary when any 

appliance is used by or near children.

6.

  Press the 

OFF

 button and unplug the fan  

from the outlet when not in use, when moving 

the fan from one location to another and  

before cleaning.

7.

  To disconnect the fan, first press the 

OFF

 button, grip the plug and pull it from  

the wall outlet. 

NEVER

 pull by the cord.

8.

 

DO NOT

 operate the fan in the presence  

of explosive and/or flammable fumes.

9.

 

DO NOT

 place the fan or any parts near an 

open flame, cooking or other heating appliance.

10.

 

DO NOT

 operate the fan with damaged cord or 

plug or if the product malfunctions, is dropped 

or damaged in any manner (see warranty).

11.

  Avoid contact with moving fan parts.

12.

  The use of attachments not recommended  

by the manufacturer may be hazardous.

13.

  Place the fan on a dry, level surface.

14.

 

DO NOT

 hang or mount fan on a wall or ceiling.

15.

 

DO NOT

 operate if the fan housing is removed 

or damaged.

16.

  A loose fit between the AC outlet (receptacle) 

and plug may cause overheating and a 

distortion of the plug. Contact a qualified 

electrician to replace loose or worn outlet.

17.

 

DO NOT

 run fan cord under carpeting. 

DO NOT

 

cover cord with throw rugs, runners, or similar 

coverings. 

DO NOT

 route cord under furniture 

or appliances. Arrange cord away from traffic 

areas and where it will not be tripped over.

WARNING:

 To Reduce The Risk of Fire or 

Electric Shock, DO NOT Use This Fan With  

Any Solid-State Speed Control Device.

       

IMPORTANT  

SAFETY INSTRUCTIONS

READ AND SAVE THESE 

SAFETY INSTRUCTIONS 

BEFORE USING THIS FAN

Summary of Contents for HSF1630 Series













Reviews: